1. Install so that there is a gap of 0 mm (0 in) between the clutch switch and clutch pedal stopper.
Tightening torque:
8 N·m (0.8 kgf-m, 5.8 ft-lb)
|
(A) |
Clutch switch |
|
(B) |
Stopper |
|
(C) |
0 mm (0 in) |
2. Measure the stroke of the clutch pedal.
Clutch pedal standard full stroke A:
130 — 135 mm (5.12 — 5.31 in)
|
(A) |
Clutch pedal (Full stroke condition) |
|
(B) |
Scale |
|
(C) |
Seat |
3. If the clutch pedal stroke is out of specification, adjust the stroke. 
4. Connect the clutch switch connector.