CLUTCH SYSTEM > Clutch Pedal

ASSEMBLY

1. Install the stopper, etc., temporarily to the pedal bracket.

2. Clean the clutch pedal and inside the brake pedal bore, apply grease and set the bushing inside the bore.

Grease:

KOPR-KOTE (Part No. 003603001) or equivalent

3. Align the pedal bracket, clutch pedal and brake pedal bore, and install the brake pedal return spring, assist rod, spring and bushing.

NOTE:

Clean the inside of the bushings and apply grease before installing the spacer.

4. Install the hill holder cable to the clutch pedal.