1. Thoroughly drain the brake fluid from the reservoir tank.
2. Remove the snap pin and clevis pin, and then separate the push rod of the master cylinder from clutch pedal.
|
(A) |
Clevis pin |
|
(B) |
Snap pin |
|
(C) |
Push rod |
|
(D) |
Push rod lock nut |
3. Remove the air cleaner case and air intake duct. (Non-turbo model) 
4. Remove the intercooler. (Turbo model)
5. Remove the clutch pipe from master cylinder.
6. Remove the master cylinder together with the reservoir tank.
CAUTION:
Be careful not to spill the brake fluid. If the brake fluid comes in contact with the vehicle body, the painted surface will be damaged. Wipe off immediately in case of contact.
