1. Install the master cylinder to the body, and attach the clutch pipe to the master cylinder.
NOTE:
Check that the pipe is routed properly.
Tightening torque:
T1: 15 N·m (1.5 kgf-m, 10.8 ft-lb)
T2: 18 N·m (1.8 kgf-m, 13.0 ft-lb)
2. Apply grease to the clevis pin.
3. Connect the push rod of master cylinder to clutch pedal, and install the new clevis pin and snap pin.
|
(A) |
Clevis pin |
|
(B) |
Snap pin |
|
(C) |
Push rod |
4. After bleeding air from system, ensure that the clutch operates properly.
5. Install the air cleaner case and air intake duct. (Non-turbo model)
6. Install the intercooler. (Turbo model)