1. Install the pitching stopper.
Tightening torque:
T1: 50 N·m (5.1 kgf-m, 37 ft-lb)
T2: 58 N·m (5.9 kgf-m, 43 ft-lb)
2. Install the air intake duct and cleaner case. (Non-turbo model)
3. Install the intercooler. (Turbo model)
4. Connect the battery ground cable to the battery.
2. CROSSMEMBER AND CUSHION RUBBER
1. Install the rear cushion rubber.
Tightening torque:
35 N·m (3.6 kgf-m, 26 ft-lb)
2. Install the rear crossmember.
Tightening torque:
T1: 70 N·m (7.1 kgf-m, 52 ft-lb)
T2: 140 N·m (14.3 kgf-m, 103 ft-lb)
3. Remove the transmission jack.
4. Install the front and center exhaust pipe. (Non-turbo model)
5. Install the center exhaust pipe. (Turbo model)
6. Install the rear exhaust pipe and muffler.