|
ILLUSTRATION |
TOOL NUMBER |
DESCRIPTION |
REMARKS |
|
|
399411700 |
ACCENT BALL INSTALLER |
Used for installing reverse shifter rail arm. |
|
|
899524100 |
PULLER SET |
Used for removing and installing the roller bearing (Differential). (1) Puller (2) Cap |
|
|
399780104 |
WEIGHT |
Used for measuring preload on the roller bearing. |
|
|
498077000 |
REMOVER |
Used for removing the roller bearing of the drive pinion shaft. |
|
|
498077300 |
CENTER DIFFERENTIAL BEARING REMOVER |
Used for removing the center differential cover ball bearing. |
|
|
498147000 |
DEPTH GAUGE |
Used for adjusting the main shaft axial end play. |
|
|
498247001 |
MAGNET BASE |
• Used for measuring backlash between the side gear and pinion, and the hypoid gear. • Used together with the DIAL GAUGE (498247100). |
|
|
498247100 |
DIAL GAUGE |
• Used for measuring backlash between the side gear and pinion, and the hypoid gear. • Used together with the MAGNET BASE (498247001). |
|
|
498427100 |
STOPPER |
Used for securing the drive pinion shaft assembly and the driven gear assembly when removing the drive pinion shaft assembly lock nut. |
|
|
498937000 |
TRANSMISSION HOLDER |
Used for removing and installing the lock nut of the transmission main shaft. |
|
|
499277100 |
BUSHING 1-2 INSTALLER |
• Used for installing the 1st driven gear thrust plate and the 1st-2nd driven gear bushing. • Used for installing the roller bearing outer race to the differential case. |
|
|
499277200 |
INSTALLER |
Used for press-fitting the 2nd driven gear, roller bearings and the 5th driven gear onto the driven shaft. |
|
|
499757002 |
INSTALLER |
• Used for installing the snap ring (OUT 25), and ball bearing (25 × 26 × 17). • Used for installing the bearing cone of the transfer driven gear (extension core side). |
|
|
18630AA010 |
WRENCH COMPL RETAINER |
• Used for removing and installing the differential side retainer. • WRENCH ASSEMBLY (499787000) can also be used. |
|
|
499827000 |
PRESS |
Used for installing the speedometer oil seal when attaching the speedometer cable to the transmission. |
|
|
499857000 |
5TH DRIVEN GEAR REMOVER |
Used for removing the 5th driven gear. |
|
|
499877000 |
RACE 4-5 INSTALLER |
• Used for installing the 4th needle bearing race and ball bearing onto the transmission main shaft. • Used together with the REMOVER (899714110). |
|
|
499917500 |
DRIVE PINION GAUGE ASSY |
Used for adjusting the drive pinion shim. |
|
|
499927100 |
HANDLE |
Used for fitting the transmission main shaft. |
|
|
499937100 |
TRANSMISSION STAND |
Used for disassembling and assembling the transmission. |
|
|
499987003 |
SOCKET WRENCH (35) |
Used for removing and installing the driven pinion lock nut and main shaft lock nut. |
|
|
499987300 |
SOCKET WRENCH (50) |
Used for removing and installing the driven gear assembly lock nut. |
|
|
899714110 |
REMOVER |
Used for fixing the transmission main shaft, drive pinion, rear drive shaft. |
|
|
899864100 |
REMOVER |
Used for removing transmission main shaft and drive pinion parts. |
|
|
899884100 |
HOLDER |
Used for tightening the lock nut on the sleeve. |
|
|
899904100 |
REMOVER |
Used for removing and installing the straight pin. |
|
|
899988608 |
SOCKET WRENCH (27) |
Used for removing and installing the drive pinion lock nut. |
|
|
398497701 |
ADAPTER |
• Used for installing roller bearing onto the differential case. • Used together with the INSTALLER (499277100). |
|
|
499587000 |
INSTALLER |
Used for installing the driven gears to the driven shaft. |
|
|
899824100 |
PRESS |
Used for installing the speedometer shaft oil seal. |
|
|
499987100 |
SOCKET WRENCH (35) |
Used for removing and installing the drive pinion lock nut. |
|
|
899984103 |
SOCKET WRENCH (35) |
Used for removing and installing the drive pinion lock nut. |
|
|
498057300 |
INSTALLER |
Used for installing the extension oil seal. |
|
|
498255400 |
PLATE |
Used for measuring backlash. |
|
|
41099AA010 |
ENGINE SUPPORT BRACKET |
Used for supporting the engine. |
|
|
41099AA020 |
ENGINE SUPPORT |
Used for supporting the engine. |
|
|
398527700 |
PULLER ASSY |
• Used for removing the extension case roller bearing. • Used for removing the front differential side retainer bearing outer race. • Used for removing the front differential side retainer oil seal. |
|
|
398643600 |
GAUGE |
Used for measuring the total end play, extension end play and drive pinion height. |
|
|
398177700 |
INSTALLER |
• Used for installing the bearing cone of transfer driven gear (transfer case side). • Used for installing the ball bearing of the transfer drive gear. |
|
|
398507703 |
DUMMY COLLAR |
• Used for installing the input shaft holder oil seal. • For dual range models. |
|
|
398663600 |
PLIERS |
• Used for removing and installing the input shaft snap ring. • For dual range models. |
|
|
499757001 |
SNAP RING GUIDE |
• Used for attaching the snap ring (OUT 25). • For dual range models. |
|
|
899858600 |
RETAINER |
• Used for removing the ball bearing. • For dual range models. |
|
|
899474100 |
EXPANDER |
• Used for removing and installing snap ring. • For dual range models. |
|
|
899580100 |
INSTALLER |
• Used for pressing the ball bearing on to the input shaft. • For dual range models. |
|
|
399513600 |
INSTALLER |
• Used for pressing the ball bearing on to the input shaft. • For dual range models. |
|
|
28399SA000 |
FRONT DRIVE SHAFT REMOVER |
Used for removing the front drive shaft. (common for the MT model, and the AT model) |
|
|
28399SA010 |
FRONT DRIVE SHAFT OIL SEAL PROTECTOR |
Used for protecting the oil seal from damage when inserting the front drive shaft. |
|
|
18675AA000 |
DIFFERENTIAL SIDE OIL SEAL INSTALLER |
Used for installing the differential side retainer oil seal. |
|
|
398791700 |
STRAIGHT PIN REMOVER |
Used for installing and removing the straight pin. |
|
TOOL NAME |
REMARKS |
|
Circuit tester |
Used for measuring resistance, voltage and current. |
|
TORX® BIT T70 |
Used for installing and removing the differential gear oil drain plug. |