1. Clean the transmission exterior.
2. Drain the ATF completely.
NOTE:
Tighten the drain plug (ATF) after draining the ATF.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
|
(A) |
Oil pan |
|
(B) |
Drain plug (ATF) |
|
(C) |
Differential gear oil drain plug |
3. Remove the rear exhaust pipe and muffler.
(Non-turbo model)
(Turbo model)
4. Remove the propeller shaft.
5. Using the ST, remove the oil seal.
| ST 398527700 | PULLER ASSY |
6. Using the ST, install the oil seal.
| ST 498057300 | INSTALLER |
7. Install the propeller shaft.
8. Install the rear exhaust pipe and muffler.
(Non-turbo model)
(Turbo model)
9. Pour in ATF.
10. Bleed the air of control valve.
11. Check the level and leaks of the ATF.