1. Remove the transmission assembly from vehicle body.

2. Pull out the torque converter clutch assembly.

3. Remove the input shaft.

4. Lift-up the lever on the rear side of transmission harness connector, and then disconnect it from the stay.

5. Disconnect the inhibitor switch connector from the stay.

6. Disconnect the air breather hose.

7. Remove the oil charge pipe.

8. Remove the ATF cooler inlet and outlet pipes.

9. Separate the converter case and transmission case.

10. Separate the transmission case and extension case section.

11. Remove the reduction drive gear.

12. Remove the reduction driven gear.

13. Remove the drive pinion shaft mounting bolt and remove the drive shaft assembly from oil pump housing.