1. Set the vehicle on a lift.
2. Move the select lever to “N”.
3. Remove the air intake chamber (non-turbo model).
4. Remove the inter cooler (Turbo model).
5. Disconnect the inhibitor switch connector.
|
(A) |
Inhibitor switch connector |
6. Remove the inhibitor switch connector from the stay.
7. Lift the vehicle.
8. Remove the front and center exhaust pipes.
(Non-turbo model)
(Turbo model)
9. Remove the snap pin and washer from the range select lever.
|
(A) |
Range select lever |
|
(B) |
Snap pin |
|
(C) |
Select cable |
|
(D) |
Washer |
10. Remove the plate assembly from the transmission case.
|
(A) |
Select cable |
|
(B) |
Plate ASSY |
11. Remove the bolt.
|
(A) |
Inhibitor switch ASSY |
12. Move the range select lever to the parking position (left side).
|
(A) |
Range select lever |
13. Remove the inhibitor switch assembly from the transmission.
|
(A) |
Inhibitor switch ASSY |
14. Disconnect the inhibitor switch harness connector from the inhibitor switch.