1. If the stop light switch does not operate properly (or if it is not secured at the specified position), replace with a new part.
Specified position L:
2 mm (0.08 in)
2. Measure the clearance between the threaded end of the stop light switch and the stopper.
CAUTION:
Do not rotate the stop light switch.
Stop light switch clearance A:
0.3 mm (0.012 in)
|
(1) |
Stop light switch |
|
(2) |
Stopper |
|
(3) |
Brake pedal |
3. If it is not within the specification, adjust it by adjusting the position of the stop light switch.
CAUTION:
Do not rotate the stop light switch.