1. Set the vehicle on a lift.
2. Loosen the wheel nuts.
3. Lift up the vehicle, then remove the rear wheels.
4. Release the parking brake.
5. Remove the brake drum from brake assembly.
NOTE:
• If it is difficult to remove the brake drum, remove the adjusting hole cover from the back plate, then turn the adjuster assembly claws using a flat tip screwdriver until the brake shoe separates from the drum.
|
(1) |
Back plate |
|
(2) |
Wheel cylinder ASSY |
|
(3) |
Adjuster ASSY claws |
|
(4) |
Adjusting lever |
|
(5) |
Tightening direction |
|
(6) |
Push direction |
• If the brake drum is difficult to remove, drive it out by installing an 8-mm bolt into bolt hole in brake drum.
