1. Clean the back plate and wheel cylinder assembly.
2. Install the wheel cylinder assembly on back plate, and tighten bolts.
Tightening torque:
10 N·m (1.0 kgf-m, 7.2 ft-lb)
3. Apply grease to the portions indicated by arrows in Figure.
Brake grease:
Dow Corning Molykote M 7439 (Part No. 003602001)
4. Install the brake assembly on housing, and tighten the bolts to install back plate.
Tightening torque:
53 N·m (5.4 kgf-m, 39.1 ft-lb)
5. Install the hub. 
6. Connect the brake hose, and tighten the brake hose flange nut.
Tightening torque:
15 N·m (1.5 kgf-m, 11.1 ft-lb)
CAUTION:
When connecting the brake hose, do not twist it.
7. Install the ABS wheel speed sensor on back plate.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
8. Apply grease to the adjusting screw and both ends of adjuster.
Brake grease:
Dow Corning Molykote M 7439 (Part No. 003602001)
9. Install the brake shoe.
10. Install the brake drum.
11. After installing rear drum brake assembly, bleed air from brake line.