1. Install the ABSCM&H/U bracket.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
2. Install the ABSCM&H/U by aligning the damper groove of the ABSCM&H/U to the bracket side claw.
NOTE:
Check the identification marks of the ABSCM&H/U.
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
3. Connect the brake pipes to their correct positions on the ABSCM&H/U.
Tightening torque:
15 N·m (1.5 kgf-m, 10.8 ft-lb)
4. Using cable clip, secure the ABSCM&H/U harness to the bracket.
5. Connect the connector to the ABSCM&H/U.
NOTE:
• Be sure to remove all foreign matter from inside the connector before connecting.
• Make sure that the ABSCM&H/U connector is securely locked.
6. Connect the grounding wire of the ABSCM&H/U and apply rust-prevention wax.
7. Install the air cleaner case. 
or
8. Bleed air from the brake system.