NOTE:
Change the setting of wheel balancer to adhesive type weight if adhesive type weight is adopted.
1. Remove the balance weights.
CAUTION:
• Be careful not to damage the wheel.
• Completely remove the double-sided tape of the adhesive weight from the wheel.
2. Using the wheel balancer, measure wheel balance.
3. Select a weight close to the value measured by wheel balancer.
|
Balance weight part number (For steel wheel) |
Weight |
|
28101TC000 |
5 g (0.18 oz) |
|
28101SA060 |
10 g (0.35 oz) |
|
28101SA070 |
15 g (0.53 oz) |
|
28101SA080 |
20 g (0.71 oz) |
|
28101SA090 |
25 g (0.88 oz) |
|
28101SA160 |
30 g (1.06 oz) |
|
28101SA170 |
35 g (1.23 oz) |
|
28101SA180 |
40 g (1.41 oz) |
|
28101SA190 |
45 g (1.59 oz) |
|
28101SA200 |
50 g (1.76 oz) |
|
28101SA210 |
55 g (1.94 oz) |
|
28101SA220 |
60 g (2.12 oz) |
|
Balance weight part number (Knock-on type weight for aluminum wheel) |
Weight |
|
28101SA000 |
5 g (0.18 oz) |
|
28101SA010 |
10 g (0.35 oz) |
|
28101SA020 |
15 g (0.53 oz) |
|
28101SA030 |
20 g (0.71 oz) |
|
28101SA040 |
25 g (0.88 oz) |
|
28101SA100 |
30 g (1.06 oz) |
|
28101SA110 |
35 g (1.23 oz) |
|
28101SA120 |
40 g (1.41 oz) |
|
28101SA130 |
45 g (1.59 oz) |
|
28101SA140 |
50 g (1.76 oz) |
|
— |
55 g (1.94 oz) |
|
28101SA150 |
60 g (2.12 oz) |
|
Balance weight part number (Adhesive type weight for aluminum wheel) |
Weight |
|
28101AG001 |
5 g (0.18 oz) |
|
28101AG011 |
7.5 g (0.26 oz) |
|
28101AG021 |
10 g (0.35 oz) |
|
28101AG031 |
12.5 g (0.44 oz) |
|
28101AG041 |
15 g (0.53 oz) |
|
28101AG051 |
17.5 g (0.62 oz) |
|
28101AG061 |
20 g (0.71 oz) |
|
28101AG071 |
22.5 g (0.79 oz) |
|
28101AG081 |
25 g (0.88 oz) |
|
28101AG091 |
27.5 g (0.97 oz) |
|
28101AG101 |
30 g (1.06 oz) |
|
28101AG111 |
32.5 g (1.15 oz) |
|
28101AG121 |
35 g (1.23 oz) |
|
28101AG131 |
37.5 g (1.32 oz) |
|
28101AG141 |
40 g (1.41 oz) |
|
28101AG151 |
42.5 g (1.50 oz) |
|
28101AG161 |
45 g (1.59 oz) |
|
28101AG171 |
47.5 g (1.68 oz) |
|
28101AG181 |
50 g (1.76 oz) |
|
28101AG191 |
52.5 g (1.85 oz) |
|
28101AG201 |
55 g (1.94 oz) |
|
28101AG211 |
57.5 g (2.03 oz) |
|
28101AG221 |
60 g (2.12 oz) |
|
28101AG231 |
62.5 g (2.20 oz) |
|
28101AG241 |
65 g (2.29 oz) |
|
28101AG251 |
67.5 g (2.38 oz) |
|
28101AG261 |
70 g (2.47 oz) |
|
28101AG271 |
72.5 g (2.56 oz) |
|
28101AG281 |
75 g (2.65 oz) |
|
28101AG291 |
77.5 g (2.73 oz) |
|
28101AG301 |
80 g (2.82 oz) |
|
28101AG311 |
82.5 g (2.91 oz) |
|
28101AG321 |
85 g (3.00 oz) |
|
28101AG331 |
87.5 g (3.09 oz) |
|
28101AG341 |
90 g (3.17 oz) |
|
28101AG351 |
92.5 g (3.26 oz) |
|
28101AG361 |
95 g (3.35 oz) |
|
28101AG371 |
97.5 g (3.44 oz) |
|
28101AG381 |
100 g (3.53 oz) |
4. Install the selected weight to the point designated by the wheel balancer.
CAUTION:
• Degrease the wheel surface where the adhesive type weight will be applied.
• Press the adhesive type weight by 25 N (2.5 kgf, 5.6 lb) or more per 5 g (0.18 oz) for more then 2 seconds and attain full adhesion.
• Total application of the adhesive type weight should be 100 g (3.53 oz) or less.
5. Using the wheel balancer, measure the wheel balance again. Check that wheel balance is correctly adjusted.
6. Use SUBARU genuine balance weights.
NOTE:
• Knock-on type balance weights are not available in 55 g (1.94 oz) size for aluminum wheels.
• Knock-on type balance weights can be used for any 15 to 16 inch wheels.
|
(1) |
Knock-on type weight for aluminum wheel |
|
(2) |
Knock-on type weight for steel wheel |
Service limit: A
Knock-on type weight for steel wheel:
5 — 60 g (0.18 — 2.12 oz) 2.0 mm (0.079 in)
Knock-on type weight for aluminum wheel:
5 — 60 g (0.18 — 2.12 oz) 5.0 mm (0.197 in)