Using the ST, press the bushing into the trailing link.
| ST 927720000 | INSTALLER & REMOVER SET |
CAUTION:
Turn ST plunger upside down and press it until the plunger end surface contacts the trailing link end surface.
|
(1) |
Press |
|
(2) |
Front bushing |
|
(3) |
Trailing link |
1. Using the ST, press the bushing into the trailing link.
| ST 927730000 | INSTALLER & REMOVER SET |
NOTE:
If it is difficult to press the bushing into the trailing link, dilute TIRE LUBE with water and apply it to the inner surface of ST as a lubricant.
Specified lubricant:
TIRE LUBE : Water = 1: 3
|
(1) |
Press |
2. Press the ST plunger until bushing flange protrudes beyond the trailing link.
| ST 927730000 | INSTALLER & REMOVER SET |
|
(1) |
Plunger |
|
(2) |
Flange |
3. Turn the trailing link upside down. As outlined in the former procedure, press the ST plunger in the opposite direction until bushing is correctly positioned in trailing link.
| ST 927730000 | INSTALLER & REMOVER SET |
|
(1) |
Press |
|
(2) |
Plunger |
4. Install the housing. 