1. Use the same ST as the one used during disassembly.
2. If it is difficult to press the bushing into the trailing link, dilute TIRE LUBE with water and apply it to the inner surface of ST as a lubricant.
Specified lubricant:
TIRE LUBE : Water = 1: 3
3. Using the ST, press the bushing into place.
|
(1) |
Press |
|
(2) |
Bushing |
|
(3) |
Lateral link |
4. Press the ST plunger until bushing flange protrudes beyond the trailing link.
|
(1) |
Press |
|
(2) |
Plunger |
|
(3) |
Lateral link |
|
(4) |
Flange |
5. Turn the lateral link upside down. As outlined in the former procedure, press the ST plunger in the opposite direction until bushing is correctly positioned in trailing link.
|
(1) |
Press |
|
(2) |
Plunger |
|
(3) |
Lateral link |