1. Connect the quick connector on fuel line.
CAUTION:
Make sure that the connected portion is not damaged and is free of dust and contamination. If necessary, clean seal surface of pipe.
NOTE:
Use a new retainer.
|
(A) |
Seal surface |
|
(B) |
Pipe |
(1) Set the new retainer (B) to connector (A).
(2) Push the pipe into the connector completely.
|
(A) |
Connector |
|
(B) |
Retainer |
|
(C) |
Pipe |
CAUTION:
• Pull the connector to ensure it is connected securely.
• Make sure the two retainer claws are engaged in their mating positions in the connector.
• Be sure to inspect hoses and their connections for any leakage of fuel.
|
(A) |
Connector |
|
(B) |
Retainer |
|
(C) |
Pipe |
2. Connect the fuel delivery hose to the pipe with an overlap of 20 to 25 mm (0.79 to 0.98 in).
Type A: When the amount to be inserted is specified.
Type B: When the amount to be inserted is not specified.
L: 2.5±1.5 mm (0.098±0.059 in)
L: 22.5±2.5 mm (0.886±0.098 in)
CAUTION:
Be sure to inspect hoses and their connections for any leakage of fuel.
|
(1) |
Type A |
|
(2) |
Type B |
|
(3) |
Pipe |
|
(4) |
Clamp |
|
(5) |
Hose |
3. Connect the evaporation hose to the pipe with an overlap of 15 to 20 mm (0.59 to 0.79 in).
L = 17.5±2.5 mm (0.689±0.098 in)
|
(1) |
Hose |
|
(2) |
Clip |
|
(3) |
Pipe |