1. Replace the belts, if crack, fraying or wear is found.
2. Check the drive belt tension and adjust it if necessary by changing generator installing position and/or idler pulley installing position.
Belt tension (with belt tension gauge):
(A)
When installing new parts:
640 — 780 N (65 — 80 kgf, 144 — 175 lb)
At inspection:
490 — 640 N (50 — 65 kgf, 110 — 144 lb)
(B) *
When installing new parts:
650 — 750 N (66 — 76 kgf, 146 — 169 lb)
At inspection:
350 — 450 N (36 — 46 kgf, 78 — 101 lb)
*: Model with air conditioner
|
(A) |
Front side belt |
|
(B) |
Rear side belt |
|
C/P |
Crank pulley |
|
GEN |
Generator |
|
P/S |
Power steering oil pump pulley |
|
A/C |
A/C compressor pulley |
|
I/P |
Idler pulley |
Belt tension (without belt tension gauge):
(A)
When installing new parts:
7 — 9 mm (0.276 — 0.354 in)
At inspection:
9 — 11 mm (0.354 — 0.433 in)
(B) *
When installing new parts:
7.5 — 8.5 mm (0.295 — 0.335 in)
At inspection:
9.0 — 10.0 mm (0.354 — 0.394 in)
*: Model with air conditioner
|
(A) |
Front side belt |
|
(B) |
Rear side belt |
|
C/P |
Crank pulley |
|
GEN |
Generator |
|
P/S |
Power steering oil pump pulley |
|
A/C |
Air conditioning compressor pulley |
|
I/P |
Idler pulley |