EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > Front Catalytic Converter

INSTALLATION

NOTE:

Use a new gasket.

1. DOHC NON-TURBO MODEL

The front catalytic converter is integrated into the front exhaust pipe. Refer to “Front Exhaust Pipe” for the installation procedures.

2. TURBO MODEL

1. Attach the front catalytic converter (A) to the rear catalytic converter (B).

Tightening torque:

35 N·m (3.6 kgf-m, 26.0 ft-lb)

2. Install the center exhaust pipe.