1. Assemble the front oil seal by using ST.
| ST 499587100 | OIL SEAL INSTALLER |
NOTE:
Use a new front oil seal.
2. Apply a coat of engine oil to inner and outer rotors.
3. Assemble the inner and outer rotors in their original positions.
4. Assemble the oil relief valve and install relief valve spring and plug.
NOTE:
Use a new gasket.
5. Assemble the oil pump cover.
Tightening torque:
T1: 5.4 N·m (0.55 kgf-m, 4.0 ft-lb)
T2: 44 N·m (4.5 kgf-m, 32.5 ft-lb)
|
(A) |
Oil seal |
|
(B) |
Pump case |
|
(C) |
Inner rotor |
|
(D) |
Outer rotor |
|
(E) |
Pump cover |
|
(F) |
Relief valve |
|
(G) |
Relief valve spring |
|
(H) |
Plug |
|
(I) |
Gasket |