1. Before installing rear oxygen sensor, apply the anti-seize compound only to the threaded portion of rear oxygen sensor to make the next removal easier.
CAUTION:
Never apply anti-seize compound to the protector of rear oxygen sensor.
Anti-seize compound:
NEVER-SEEZ NSN, JET LUBE SS-30 or equivalent
2. Install the rear oxygen sensor.
Tightening torque:
21 N·m (2.1 kgf-m, 15.2 ft-lb)
|
(A) |
Front oxygen (A/F) sensor |
|
(B) |
Rear oxygen sensor |
3. Install the under cover.
4. Lower the vehicle.
5. Hold the harness with clip.
6. Connect the connector to rear oxygen sensor.
|
(A) |
Front oxygen (A/F) sensor connector |
|
(B) |
Rear oxygen sensor connector |
|
(C) |
Clip |
7. Connect the battery ground cable to the battery.
