DTC DETECTING CONDITION:
Immediately at fault recognition
TROUBLE SYMPTOM:
Failure of engine to start
CAUTION:
After repairing or replacing the defective part, perform the Clear Memory Mode 
and Inspection Mode .
WIRING DIAGRAM:
• LHD model
• RHD model
| STEP | CHECK | YES | NO |
|
Does the starter motor operate when ignition switch is turned to START? |
Repair the harness and connector. NOTE: In this case, repair the following item: • Open or ground short circuit of harness between ECM and starter motor connector • Poor contact in ECM connector |
Check the starter motor circuit. |