IMMOBILIZER (DIAGNOSTICS) > Read Diagnostic Trouble Code (DTC)

OPERATION

1. On the «Main Menu» display screen, select {Each System Check} and press the [YES] key.

2. On the «System Selection Menu» display screen, select {Engine Control System} and press the [YES] key.

3. Press the [YES] key after the information of engine type is displayed.

4. On the «Engine Diagnosis» screen, select {DTC Display}, and then press the [YES] key.

5. On the «Diagnostic Code(s) Display» screen, select {Current Diagnostic Code(s)} or {History Diagnostic Code(s)}, and then press the [YES] key.

NOTE:

• For detailed operation procedure, refer to the “SUBARU SELECT MONITOR OPERATION MANUAL”.

• For detailed concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC).