ENGINE (DIAGNOSTICS)(H4SO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC DETECTING CONDITION:
Detected when two consecutive driving cycles with fault occur.
TROUBLE SYMPTOM:
Failure of engine to start
CAUTION:
After repairing or replacing the defective part, perform the Clear Memory Mode
and Inspection Mode
.
WIRING DIAGRAM:
1.CHECK OPERATION OF STARTER MOTOR.
Turn the ignition switch to ON.
NOTE:
Place the inhibitor switch in each position.
|
Does the starter motor operate?
|
Repair the battery short circuit in starter motor circuit.
|
Check the starter motor circuit. 
|