ENGINE (DIAGNOSTICS)(H4SO) > General Diagnostic Table

INSPECTION

1. ENGINE

NOTE:

Malfunction of parts other than those listed is also possible.

Symptom

Problem parts

1. Engine stalls during idling.

1) Manifold absolute pressure sensor

2) Mass air flow and intake air temperature sensor

3) Ignition parts (*1)

4) Engine coolant temperature sensor (*2)

5) Crankshaft position sensor (*3)

6) Camshaft position sensor (*3)

7) Fuel injection parts (*4)

2. Rough idling

1) Manifold absolute pressure sensor

2) Mass air flow and intake air temperature sensor

3) Engine coolant temperature sensor (*2)

4) Ignition parts (*1)

5) Air intake system (*5)

6) Fuel injection parts (*4)

7) Electronic throttle

8) Crankshaft position sensor (*3)

9) Camshaft position sensor (*3)

10) Oxygen sensor

11) Fuel pump and fuel pump relay

12) EGR valve

3. Engine does not return to idle.

1) Engine coolant temperature sensor

2) Electronic throttle

3) Manifold absolute pressure sensor

4) Mass air flow and intake air temperature sensor

5) EGR valve

4. Poor acceleration

1) Manifold absolute pressure sensor

2) Mass air flow and intake air temperature sensor

3) Electronic throttle

4) Fuel injection parts (*4)

5) Fuel pump and fuel pump relay

6) Engine coolant temperature sensor (*2)

7) Crankshaft position sensor (*3)

8) Camshaft position sensor (*3)

9) A/C switch and A/C cut relay

10) Engine torque control signal circuit

11) Ignition parts (*1)

12) EGR valve

13) Tumble generator valve

5. Engine stalls, hesitates, or sputters at acceleration.

1) Manifold absolute pressure sensor

2) Mass air flow and intake air temperature sensor

3) Engine coolant temperature sensor (*2)

4) Crankshaft position sensor (*3)

5) Camshaft position sensor (*3)

6) Purge control solenoid valve

7) Fuel injection parts (*4)

8) Electronic throttle

9) Fuel pump and fuel pump relay

10) EGR valve

11) Tumble generator valve

6. Surging

1) Mass air flow and intake air temperature sensor

2) Manifold absolute pressure sensor

3) Engine coolant temperature sensor (*2)

4) Crankshaft position sensor (*3)

5) Camshaft position sensor (*3)

6) Fuel injection parts (*4)

7) Electronic throttle

8) Fuel pump and fuel pump relay

9) EGR valve

10) Tumble generator valve

7. Spark knock

1) Mass air flow and intake air temperature sensor

2) Manifold absolute pressure sensor

3) Engine coolant temperature sensor

4) Knock sensor

5) Fuel injection parts (*4)

6) Fuel pump and fuel pump relay

7) EGR valve

8) Tumble generator valve

8. After-burn in exhaust system

1) Mass air flow and intake air temperature sensor

2) Manifold absolute pressure sensor

3) Engine coolant temperature sensor (*2)

4) Fuel injection parts (*4)

5) Fuel pump and fuel pump relay

*1: Check ignition coil and ignitor assembly and spark plug.

*2: Indicate the symptom occurring only in cold temperatures.

*3: Ensure the secure installation.

*4: Check the fuel injector and fuel pressure regulator.

*5: Inspect air leak in air intake system.