CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)

DTC 13

Detected when the clutch pedal is depressed, or malfunction related to the clutch switch occurs.

TROUBLE SYMPTOM:

• Cruise control cannot be set.

• Cruise control cannot be released.

WIRING DIAGRAM:

• LHD model

• RHD model

STEPCHECKYESNO

1.CHECK CLUTCH SWITCH CIRCUIT.

1) Turn the ignition switch to OFF.

2) Disconnect the clutch switch harness connector.

3) Turn the ignition switch to ON.

4) Measure the voltage between harness connector terminal and chassis ground.

Connector & terminal

(B107) No. 2 (+) — Chassis ground (−):

Is the voltage 10 V or more?

• Check fuse No. 18 (in fuse & relay box).

• Check open or shorted circuit of harness between clutch switch and fuse & relay box.

2.CHECK CLUTCH SWITCH CIRCUIT.

1) Turn the ignition switch to OFF.

2) Disconnect the harness connector of ECM.

3) Measure the resistance between clutch switch harness connector terminal and ECM harness connector terminal.

Connector & terminal

LHD 2.0 L model

(B107) No. 1 — (B136) No. 34:

LHD 2.5 L model

(B107) No. 1 — (B135) No. 20:

RHD 2.0 L model

(B107) No. 1 — (B136) No. 34:

RHD 2.5 L model

(B107) No. 1 — (B136) No. 25:

Is the resistance less than 10 Ω?

Repair the harness.

3.CHECK CLUTCH SWITCH.

Remove and check the clutch switch.

Is clutch switch normal?

Clutch switch circuit is normal.

Replace the clutch switch.